Peronat - Perlite Plaster - 35 kg

It is a bagged gypsum-based ready-made plaster that can be applied directly on materials such as brick, concrete, gross concrete, gas concrete, pumice block, etc. It provides fire-resistant sound insulation. 

Physical Form: White powder  
Plaster/Water Ratio: 6-6.5 liters of water to 10 kg  
Usage Time: 60-90 minutes  
Setting Time: 150 minutes  
Consumption Amount: 8.5-9.0 kg/m³ (per 1 cm thickness)  
Compressive Strength: 2.5 N/mm² (4x4x16 blocks)  
Flexural Strength: 1.0 N/mm² (4x4x16 blocks)  
Dry Unit Weight: 650-750 kg/m³  
Fire Reaction: A1 (According to TS EN 13279 - 1 Standard 13279-1.2 (Type B4)  

APPLICATION SURFACE and ENVIRONMENT

- Must be free from dirty materials such as dust, oil, paint.  
- Excessively dry, hot, and absorbent surfaces should be moistened with water.  
- The surface of the ceilings should be roughened before applying the plaster or primed with a material that ensures the mortar adheres to the surface.  
- During the application, care should be taken to ensure that there is no air current or draft in the environment.  
- The application temperature should be +5 to +35°C.  

APPLICATION

6-6.5 liters of clean water is poured into the container where the mixture will be made and 10 kg of Peronat is sprinkled on top. It is waited for approximately 2-3 minutes for the plaster to absorb the water. It is mixed with a mixer or trowel until a homogeneous mixture is obtained. The application thickness is determined with the help of anos according to the smoothness of the surface. The prepared mortar is applied to the surface with a steel trowel. The mortar is leveled and smoothed. After leveling, the surface is smoothed with a steel trowel. If two layers are to be applied, the second layer should not be applied before the first layer has set.

PACKAGING

Polypropylene bag 25 kg (+- 2%)

STORAGE

A maximum of 15 bags should be stacked on top of each other in a dry place, the bags should be stored in a way that they do not come into contact with the ground and are protected from moisture and condensation. They should be used within 9 months from the date of production.