Makonat - Machine Plaster - 35 kg

It is a bagged gypsum-based ready-made machine plaster that can be applied directly on materials such as brick, concrete, gross concrete, aerated concrete, pumice block, etc.

Physical Form: White powder
Gypsum/Water Ratio: 5.5-6 liters of water per 10 kg
Usage Time: 130-180 minutes
Setting Time: 250-300 minutes
Consumption Amount: 9.0-9.5 kg/m³ (per 1 cm thickness)
Compressive Strength: 2.5 N/mm² (4x4x16 blocks)
Flexural Strength: 1.0 N/mm² (4x4x16 blocks)
Dry Unit Weight: 730-800 kg/m³
Reaction to Fire: A1 (According to TS EN 13279 - 1)
Standard: 13279-1.2 (Type B4, Spray applied)

Surface and Environment to be Applied:

- Clean from dirty materials such as dust, oil, paint.
- Excessively dry, hot, and highly absorbent surfaces should be moistened with water.
- The surface of the ceilings should be roughened before applying the plaster or primed with a material that ensures the mortar adheres to the surface.
- Ensure there is no air current or draft in the environment during the application.
- The application temperature should be +5 to +40 °C.

Application:

A suitable plaster/water (5.5-6 liters of water/10 kg maconate) ratio is prepared in the plastering machine. The mortar is sprayed on the surface with the machine. The application thickness is determined with the help of anolar according to the smoothness of the surface. The plaster applied to the surface is smoothed with the help of a gauge. When the surface starts to harden, smoothing is done with a steel trowel. When the surface reaches a consistency that will not collapse when pressed lightly with a finger, the trifilling process is performed. After the trifilling process, the surface is polished again with a steel trowel and made ready for painting.

Packaging:

Polypropylene bag 35 kg (+- 2%)

Storage:

A maximum of 15 bags should be stacked on top of each other in a dry place, the bags should be stored in a way that they do not come into contact with the ground and are protected from moisture and condensation. They should be used within 6 months from the date of production.