Satonat - Satin Finishing Plaster - 25 kg

It is a final coat finishing plaster under paint with high adhesion properties. It can be applied on plaster surfaces plastered with PERONAT or MAKONAT, as well as on plasterboard surfaces.

Physical Form: White powder
Plaster/Water Ratio: 10 Kg per 7 Lt Water
Usage Time: 120-160 minutes
Setting Time: 300-350 minutes
Consumption Amount: 0.2 – 0.4 Kg/m3 (per 1 cm thickness)
Compressive Strength: 3.0 N/mm² (4x4x16 blocks)
Flexural Strength: 1.0 N/mm² (4x4x16 blocks)
Dry Unit Weight: 680-720 Kg/m³
Reaction to Fire: A1 (According to TS EN 13279-1)
Standard: TSE EN 13279-1.2 (Type C6, thin applicable plaster)

Application Surface and Environment:
- Must be free from dirty materials such as dust, oil, paint.
- Excessively dry, hot, and highly absorbent surfaces should be moistened with water.
- During the application, care should be taken to ensure that there is no air current or draft in the environment.
- Application temperature should be between +5 and +40 C.

Application:
6.5-7 lt of water is added to the container in which the mixture will be made. Satonat Satin Finishing Plaster is added by sprinkling it on top. It is waited for approximately 2-3 minutes for the plaster to absorb the water. It is mixed with a hand mixer or a trowel until a homogeneous mixture is obtained. The mortar that is ready for use is applied to the surface with a steel trowel.

Packaging:
Polypropylene bag 30 kg (+- 2%)

Storage:
A maximum of 20 bags should be stacked on top of each other in a dry place, the bags should be stored in a way that they will not come into contact with the ground and are protected from moisture and condensation. It should be used within 9 months from the date of production.